Evolux Kit Linear

The EVOLUX KIT LINEAR comprises a section of WATER-STOP waterproofing membrane, a stainless steel
strainer assembly, linear shower drain, a 2’’ drain body for residential use, a special twopiece clamping ring to connect the drain to the waterproofing membrane and with push-fit connection to the strainer, and finally, the required accessories to properly install shower drain and get a completely
waterproofed shower pan ready to tile installation.

 

 

The EVOLUX KIT LINEAR comprises a section of WATER-STOP waterproofing membrane, a stainless steel
strainer assembly, linear shower drain, a 2’’ drain body for residential use, a special twopiece clamping ring to connect the drain to the waterproofing membrane and with push-fit connection to the strainer, and finally, the required accessories to properly install shower drain and get a completely
waterproofed shower pan ready to tile installation.
EVOLUX clamping ring fits in most of shower drain bases. The simple connection to standard drains
makes the EVOLUX system suitable for new construction and renovation.
WATER-STOP is a thin load bearing, bonded, sheet membrane for waterproofing applications which
meets the American National Standard for Thin-Set Ceramic Tile and Dimension Stone Installations
ANSI A118.10 for Load Bearing, Bonded, Waterproof Membranes and ANSI A118.12 for Crack Isolation
Membranes.
We strongly recommend waterproofing shower walls with WATER-STOP membrane from GURU®,
which is commercially available in rolls.

Refs:

IEU4116   KIT EVOLUX LISA 16”
IEU4128   KIT EVOLUX LISA 28” 
IEU4136   KIT EVOLUX LISA 36” 

IEU4216   KIT EVOLUX PLUS 16” 
IEU4228  KIT EVOLUX PLUS 28” 
IEU4236  KIT EVOLUX PLUS 36”

IEU4516   KIT EVOLUX INTEGRA 16” 
IEU4528   KIT EVOLUX INTEGRA 28” 
IEU4536   KIT EVOLUX INTEGRA 36”

IEU5128  KIT EVOLUX NERO 28″

IEU5136  KIT EVOLUX NERO 36″

IEU6128   KIT EVOLUX LISA GOLD 28″

IEU6136  KIT EVOLUX LISA GOLD 36″

IEU8136   KIT EVOLUX ARTS 36″

IEU9128  KIT EVOLUX WHITE GLASS 28″

IEU9136  KITE EVOLUX WHITE GLASS 36″

 

kit Content

This kit include:

  • A 6’ 7” x 6’ 7” (43.06 sq ft) –sized section of WATER-STOP waterproofing membrane.
  • W-S DIN preformed in-corner
  • W-S DEX preformed out-corner
  • MIXING Valve Seal
  • An ABS drain body base with 2” Sch. 40 hub x inside 3” connection; 4 x ¾’’ hex bolts to attach the ring to the drain body
  • Two-piece EVOLUX clamping ring and adapter with a resilient gasket for push-in connection of the strainer assembly
  • Installation template
  • Low profile drain made of marine grade stainless steel 16 gauges thick. Sizes and designs depending on model
  • Hair-strainer included

Installation

porque elegir Ingles@4x